Flange Bearing, for LP144, LP144SC, A144, A144-3 & 2288 Model Granulators 2-15/16″ ID, 4-Bolt
Item #
106784
$338.12
/ EACH
Granulator Blade, Rotating, LP144 & LP288
Item #
106933
Item is returnable
$127.00
/ EACH
Granulator Blade, Rotating/Fly Knife, D2, for IMS Models LP144, LP288 & Other Models with 12″ x 12″ or 12″ x 24″ Feed Throats.
*** Qty Three Needed Per LP144. Qty Six Needed Per LP288 ***
- Edge Style: Beveled
- Dimensions: 11-3/4" x 3-7/16"
- Taper: 30 Degree
- Type: Blade
- Brand: IMS
Item Documents
- Item Catalog Page 792
-
-
Granulator Screen, 5/16″ Holes, for LP86/A86
Item # 106935Request Quote/Call for Price -
Grinder Blade, Stationary, LP49, D2 Steel
Item # 106816Request Quote/Call for Price -
Screw, Screen Retaining, for LP288 Grinder. 1/2″-13 Thread, with Elongated Locking Nut
Item # 107295Request Quote/Call for Price -
Flange Bearing, 2-7/16″ ID, 4 Bolt Drive Side Bearing Used on Model LP86 & A86 Granulators
Item # 106820$228.00 / EACH -
Grease Seal, for IMS Grinder Bearings. 3″ ID x 4-1/2 OD.
Item # 106833$50.00 / EACH -
Blade Bolt, Stationary, LP-187 Series, 1/2″ – 13 x 2-1/4″, Grade 8, 12 Required Per Machine
Item # 106780$1.10 / EACH -
Grinder Blade, Stationary, LP187 Series
Item # 106772Request Quote/Call for Price -
Granulator Screen, 1/4″ Holes, for LP49
Item # 106796Request Quote/Call for Price -
Flange Bearing, Idler, 2-3/16″ ID, 4 Bolt
Item # 106854$250.00 / EACH -
Hopper Hold Down Bolt, 1/2″-13 Thread, 2-3/4″ L
Item # 107299Request Quote/Call for Price -
Grease Seal, 2.438″ ID X 3.548″, Drive Side
Item # 106841$50.00 / EACH