Item# 106124

Circuit Breaker, 50 Amp, 230/60/3, 3 Pole, Used in Model 8 Circulator, 5, 8, & 12 Zone Temperature Controllers and 230 Volt Model HH16 Oil Circulator. *Note: Larger Threads (1/4-20) Are Now Standard Per UL Requirements.
Catalog Page 249

Item# 106260

Circuit Breaker, 15 Amp, 460/60/3, 3 Pole.

Item# 106234

Circuit Breaker, 25 Amp, 460/60/3, 3 Pole

Item# 121352

Goulds Seal Repair Kit for All SS Pumps, Models 1ST, 2ST, & 3ST, 1MS, 2MS, and 3MS. Pump Must Have (4) in the Part Number Example: 1ST2C1A(4)F for All Horse Power Pumps - 1/2hp to 5hp
Catalog Page 735

Item# 106131

Seal Kit, Burks Water Pump, Viton (R), Burks # 09762-1. Fits Burks Models 7GA, 7GA5, 37G5, 37GA5, & GNA 1-1/4 Not for Use with MJ or Other Oil Pumps, Used on IMS HV65, Midget, Model 1, and Old WS45 and Old Econ with Burks Pump.

Item# 106277

Mechanical Seal Kit, for Gna5 1-1/4" Mj Burks Pump for 8 HH & Model 6 Cir, Includes Mechanical Seal and Seat (Viton(R))

Item# 129885

Pump and Motor Assembly (Blue), 1 hp Goulds, for Model MC75AC, MC75WC and MC90AC. Also Used as Recirculating Pump in IMS True Ton Chiller Model 2000AC. Pump has High Temp Seals. 1-1/4" NPT Inlet, 1" NPT Discharge. 208-230/460 V, 3 Phase.

Item# 161851

Pump & Motor Assembly, 1 hp, 3500 rpm, ODP Motor, Stainless Steel, 230/460 Volt 3 Phase. Used on IMS MC90AC Mold Temp Controllers.
Catalog Page 733

Item# 112360

Pump & Motor Assembly, G & L Series, Stainless Steel Pump, 1-1/4 NPT Inlet, 1" NPT Outlet, 1/2 hp Motor, EPR/Viton(R) Se 115/230/60/1, 3450 rpm
Catalog Page 735

Item# 149617

Mold Circulator, Pressurized, 230/60/3 V, 1 hp Pump, 9 kW Heating Element. Shini Model #STM-910W Built-In Process Alarms Indicate Low Level, Motor Overload, High Temp, & Loss of Power & Water Pressure.
Catalog Page 743
Instruction Manual

Item# 149618

Mold Circulator, Pressurized, 460/60/3 V, 1 hp Pump, 9 kW Heating Element. Shini Model #STM-910W Built-In Process Alarms Indicate Low Level, Motor Overload, High Temp, & Loss of Power & Water Pressure.
Catalog Page 743
Instruction Manual

Item# 163525

Mold Circulator, Air Cooled, Hydra Model MC90AC, 230/60/3 Volt, 250 Degree F Max, 1 hp Stainless Steel Pump Stainless Steel Tank, Tank Level Indicator, Low Fluid Level Electrical Shut Off, Model TEC-9300-411100 Temperature Controller with Molding Machine Interfacing Capabilities.
Catalog Page 733
Instruction Manual

Item# 158490

High Limit Controller, Temperature Control 48mm x 48mm, Din, Relay, 32-752 F, 100-240VAC 50/60Hz. Used on HH16 Inside Control Panel.

Item# 134845

Replacement Gasket for Heater Element on Model HH16 High Heat Oil Circulator

Item# 135788

Cooling Solenoid Valve, 3/4" NPT, Complete with 120 Volt Coil, Used in Model HH16 Hot Oil Circulators. for 120 Volt Coil Only, See IMS Item #141732

Item# 133277

** This item has been scheduled to be discontinued and will no longer be available once current stock is depleted. ** Temperature Controller Only, 50-250F, Paktronics, Used in All Temkon SS Where Pakstats Are Used. Readout with 5" Cable Sold Separately as IMS # 160139
Catalog Page 735

Item# 148747

Pump Seal Repair Kit, for IMS Hydra Pressurized Circulators, 3/4 to 3 hp Pump, Compatible with Model # RA090804 (133740) and RA090803 (137923) and Others Up to 3 hp.

Item# 164838

Temperature Controller, Model 9300, 1/16 Din, Programmed. Molding Machine Interfacing Capability. Used in IMS Air Cooled Mold Temperature Controller MC90AC (163525 and 164036).
Catalog Page 733

Item# 108448

Immersion Heater, 230/60/1, 3 kW for Temkon SS & Econ Mold Circulators.
Catalog Page 735

Item# 168513

Heating Element, Immersion, 9kW, 230/460 VAC, for IMS Hydra Model RQE Pressurized Mold Temperature Controllers.
Catalog Page 741

Item# 148639

Heating Element, Immersion, 9kW at 230 VAC. for IMS Hydra Models RA090803 & MC90AC (230V) IMS Mold Temperature Controllers. Wired Parallel Delta
Catalog Page 733