Sort by:
  • Item# 133277
    Temperature Controller Only, 50-250F, Paktronics, Used In All Temkon Ss Where Pakstats Are Used. Readout With 5" Cable Sold Seperately As IMS # 160139
    Catalog Page 735
    $106.14 ea
  • Item# 148747
    Pump Seal Repair Kit, For IMS Hydra Pressurized Circulators, 3/4 To 3 hp Pump, Compatible With Model # Ra090804 (133740) And Ra090803 (137923) And Others Up To 3 hp.
    $205.78 ea
  • Item# 164838
    Temperature Controller, Model 9300, 1/16 Din Programmed. Molding Machine Interfacing Capability. Used In IMS Air Cooled Mold Temperature Controller Mc90Ac (163525 And 164036).
    Catalog Page 733
    $245.00 ea
  • Item# 168521
    Pump Repair Seal Kit, For IMS Hydra Model RQE Pressurized Circulators With 3/4 To 3 hp Pumps.
    Catalog Page 741
    $192.92 ea
  • Item# 136827
    Pump Seal Kit For 1 hp American Stainless Pump To Mc75W & Mc75A Water Circ. Includes: Casing O-Ring, Impeller O-Ring & Mechanical Seal. Viton
    $204.16 ea
  • Item# 106192
    Relay, Mercury Displacement, 35 Amp, Resistive, 3 Pole, 120/60/1 Volt Coil. Used In: 6 & 6AT Circulators, Model 8 Circulator 460V Only, P75 Circulator MD100, MD75050 & HAD751 Hopper Dryers & All Waterstar Circulators.
    $73.92 ea
  • Item# 120108
    Solid State Controller, For Mc75Ac, Mc75Wc, And Tmc75 Mold Temperature Controllers. 1/13/21 - Min Buy 5
    $640.64 ea
  • Item# 160321
    Sight Glass Assembly, Fluid Level Gauge, Brass, 1/4 NPT Male Thread, Includes 1/4 NPT Male, Zinc Plated Swivel Fitting, Viton Seal Used On IMS Hydra Air Cooled Circulators And Hh16 Oil Mold Temperature Controller
    $58.40 ea
  • Item# 168701
    Pump Seal Repair Kit, Shini Water Circulator Model: STM-910W, Pump Model: TP-75
    $120.00 ea
  • Item# 158872
    Carlo Gavazzi Overload #Cgt12M-1-1.6, 1.0 To 1.6 Amps, Used In Conjunction With Contactor #160234 To Form Motor Starter In IMS Brand Hot Oil Mold Temperature Controller, Model Hh16, #121009 And #121008. Not Compatible With Allen Bradley Contactor.
    $45.00 ea