Item# 106784

Flange Bearing, for LP144, LP144SC, A144, A144-3 & 2288 Model Granulators 2-15/16" ID, 4-Bolt,

Item# 106820

Flange Bearing, 2-7/16" ID, 4 Bolt Drive Side Bearing Used on Model LP86 & A86 Granulators. Item# Fc425-2-4375

Item# 106854

Flange Bearing, Idler, 2-3/16" ID, 4 Bolt.

Item# 106787

Hold Down Bolt, Flat Head Socket Screw, 3/8"-16 x 1-1/4", Grade 8 Black Oxide for Models LP86SC (12 Req), LP120SC (18 Req), LP144SC (18 Req), LP187SC (24 Req), Grinder Stagger Cut Blades

Item# 106985

Bolt, Grinder Blade, Stationary, 144 & 288, 1/2"-13 x 2-1/2", Grade 8, Fully Threaded (6) Required for Models 2144, 3144, LP144, (12) Required for 2288 and LP288 Series

Item# 106876

Hold Down Bolt, Hex Head Cap Screw, 1/2"-20 x 1-3/4", Grade 8 Black Oxide for Models LP144-2 (8 Required), LP144-3 (12 Required), LP288 (24 Required) Grinder Rotating Blades

Item# 106762

Granulator Blade, Stationary/Bed Knife for IMS Model #s: LP144, LP288, A144, A288 and Other IMS Models with 12" x 12" or 12" x 24" Feed Throats, D2 High Carbon Steel.
Catalog Page 792

Item# 166054

Granulator Blade, Rotating/Fly Knife for IMS Model LP86SC, LP187SC, and AG86KHSC with Staggered Cut Rotors, D2 Steel. Note: Need 12 for 86SC, Need 24 for 187SC.
Catalog Page 793

Item# 106933

Granulator Blade, Rotating/Fly Knife, D2, for IMS Models LP144, LP288 & Other Models with 12" x 12" or 12" x 24" Feed Throats.
Catalog Page 792

Item# 106740

Flywheel Bushing, for IMS LP Series Grinders 2-11/16" ID, F Bore. Complete with Mounting Hardware

Item# 106741

Motor Pulley Bushing, for Granulators 2288, LP-288, LP-288-Sc, LP187, & LP-187-Sc. 1-5/8" QD Bushing, Sk Series Old IMS No. Grd3-Sk16250

Item# 159747

Drive Belt, for Granulator, Shini Series SG-20 Models.
Catalog Page 789

Item# 167560

Front Cover Only, Clear Lexan, for IMS Brand Granulator Control Box. Blank Cover Requires Switch Mounting Holes to Be Cut-Out by Customer.

Item# 107792

Motor, 5hp, 208/230/460/3 Volt, 1750 rpm 184T Frame, Baldor MFG, Used on IMS Granulators Model LP120SC & LP86SC

Item# 107081

Pushbutton Assembly, Granulator, by Westinghouse

Item# 106841

Grease Seal, 2.438" Inside Diameter x 3.548", Drive Side, for IMS Granulators as Specified.

Item# 106879

Granulator Rotor Grease Seal for Idler Side Dimensions: 2.188" Inside Diameter x 3.001" OD

Item# 106940

Grease Seal, for Granulator LP-144, LP-144-SC, LP-187, A144, A144-3, 2.938" ID x 3.750" OD.

Item# 106788

Granulator Screen, 5/16" Diameter Drilled Holes. Machine Make: IMS Company Machine Model: LP288 / LP-288

Item# 106754

Granulator Screen, 5/16", LP144, LP144SC, and A144 Series IMS Granulators

Item# 106971

Grinder Screen, 1/4" Hole, LP-86 Series - A86, A86-B, LP86, LP86SC & AG86.

Item# 164733

Filter Sock, for Shini Grinders SG-23/30, Collects & Holds Dust & Fines from Regrind. 24" Long x 12" Wide, Open on (1) End.

Item# 165216

Filter Sock, for Shini SG-23 and SG-30 Series Granulators.

Item# 107283

Hopper Hold Down Bolt 1/2"-13 x 2-3/4" Lg from Center of Pivot Pin, Complete with Nut, Washer, Cotter Pins & 2-1/4" Long Pivot Pin.