Item# 127924

Desiccant, 25 lb, Type 13X, 1/8" Bead, 4 x 8 Mesh, Molecular Sieve, for Hopper Dryers and Other Drying Systems.
Catalog Page 697
SDS English   SDS Español

Item# 127926

Desiccant, 275 lb, Type 13X, 1/8" Bead, 4 x 8 Mesh, Molecular Sieve, for Hopper Dryers and Other Drying Systems,
Catalog Page 697
SDS English   SDS Español

Item# 127925

Desiccant, 110 lb, Type 13X, 1/8" Bead, 4 x 8 Mesh, Molecular Sieve, for Hopper Dryers and Other Drying Systems, 110-Pound Paper Drum
Catalog Page 697
SDS English   SDS Español

Item# 112254

Hygrosensor, for Model 8070, 8072 & 8072A IMS Dew Point Meter/Monitors.
Catalog Page 773

Item# 103796

Desiccant Tube, for Use with Dew Point Meter/Monitor, Capped Air Tight Both Ends.
Catalog Page 699

Item# 103808

Inline Air Filter, for Dew Point Meter/Monitor
Catalog Page 699

Item# 113228

Drying Hopper, Mobile, 24" Diameter Stainless Steel Closed Loop Spiral with Slide Gate, Aluminum Stand with Casters.
Catalog Page 708

Item# 114165

Housing Only for Air Take-Off Magnet for Model MDH24 Mobile Drying Hopper. Includes Four 1/4-20 x 5/8" Stainless Steel Flat Head, Socket Head Cap Screws
Catalog Page 709

Item# 114170

Insulated Boot for IMS Model MDH24 Mobile Drying Hopper.
Catalog Page 709

Item# 108287

Drying Oven, Bench Type, 9 Tray, 120/60/1, IMS Model # DG0209-120 13.4 Amp, 1600 Watt, 392 F Max Temp, Tray Size: 4-1/2"W x 8-1/2"L x 2-1/2"D, Thermostat Control.
Catalog Page 710
Instruction Manual

Item# 108307

Fan Motor, 1/80hp, 230 Volt, 5/16 Diameter Shaft Used in IMS Ovens, Model DG0200LT, DR350, DG0308, NB-350, and NB-550.

Item# 115823

Drying Oven, Bench Type, 8 Drawer, 240/60/1, 10 Amps, Max Temp 350F, - Model # DR350 Drawer Size: 11-3/4" W x 25" L x 2" D, Fully Adj Thermostat Control, Manual Reset Excess Temp Control. Former Item# Dod1-DR350-230
Catalog Page 713
Instruction Manual

Item# 108654

Hopper Dryer Hose, 2-Ply, Orange, 4" ID, 12' Long, Industrial Ducting Hose, Silicone Coated Fiberglass with Wire Helix.

Item# 173669

Hopper Dryer Hose, 1-Ply, Orange, 2" ID, 13' Long, Industrial Ducting Hose, Silicone Coated Fiberglass with Wire Helix. ** Replaces Old Part # 136509 **
Catalog Page 408

Item# 136673

Hopper Dryer Hose, 2-Ply, Orange, 1" ID, 12' Long, Industrial Ducting Hose, Silicone Coated Fiberglass with Wire Helix.

Item# 108251

Economy Drying Hopper Dispersion Cone with Non-Adjustable Support Legs, High Efficiency, Carbon Steel, 1-7/8" OD Tube.
Catalog Page 680

Item# 108363

Heater Coil and Rack, 460/60/3 86.53 Ohms (+/- 5%), 7.5 kW for MD100-480-3, MD75050-460-3, HAD-751-460-3 and HD-750-50 Hopper Dryers.
Catalog Page 704

Item# 111916

Premium Drying Hopper Dispersion Cone with Adjustable Support Legs, High Efficiency, Stainless Steel, 1-7/8" OD Tube, Solid Top Cone and Perforated Bottom Cone. Can Be Used with All Round/Tapered Hoppers.
Catalog Page 680

Item# 163884

Floor Stand, Shini # FSN-50, Stand for Shini Hot Air Dryer Model #S SHD-12, SHD-25, SHD-50, & SHD-75, 25" L x 27.5" W x 24" H. Also SEHD-12 Thru 75. Painted Steel with Casters.
Catalog Page 707

Item# 161472

Air Take-Off/Material Suction Box for Shini Drying Hoppers. Model SBU-20-38S. Includes Single 1-1/2" OD Outlet. Used with Shini Dryer Model's SHD-12 thru SHD-75 & SEHD-12 thru SEHD-75
Catalog Page 705

Item# 173206

Hot Air Hopper Dryer, Shini SEHD-25, 230/60/3, 0.88 cu ft Hopper, 31 lb Hopper Capacity*, Painted Steel Hopper with Stainless Steel on all Material Contact Surfaces, Includes 7-Day Start/Stop Timer and Sight Glass. This energy efficient model replaces IMS #161893, Shini #SHD-25-UL.
Catalog Page 706