Item# 118308

Mold Cleaner, White 2000, Aerosol Spray Can, 16 Fl oz (Nominal), 16 oz Net Wt, Sold Each, Normally Packed 12 Cans Per Box
Catalog Page 132
SDS English   SDS Español

Item# 118310

Mold Cleaner, Red 2000, Aerosol Spray Can, 16 Fl oz (Nominal), 10 oz Net Wt, Sold Each, Normally Packed 12 Cans Per Case
Catalog Page 133
SDS English   SDS Español

Item# 113653

Mold Release, 3% Silicone Spray, 16 Fl oz (Nominal), 12 oz Net Wt, Sold Each, Normally Packed 12 Cans Per Case.
Catalog Page 117
SDS English   SDS Español

Item# 124325

Magnet Mounting Kit for Drop Trays & Chutes. Includes (4) 2-3/4" Diameter 70 lb Pull Force Magnets with "J" Bolt, 2 Hex Nuts and Lock Washers.
Catalog Page 770

Item# 164889

Variable Speed Controller, Model KBWA for IMS Select Line Conveyors. Adjustable 0 to 30 Feet Per Minute. Pre-Wired and Ready to Install. Selectable Forward, Stop, and Reverse. Soft Start with Electronic Motor Overload Protection. 120/60/1 VAC.
Catalog Page 777

Item# 127924

Desiccant, 25 lb, Type 13X, 1/8" Bead, 4 x 8 Mesh, Molecular Sieve, for Hopper Dryers and Other Drying Systems.
Catalog Page 697
SDS English   SDS Español

Item# 140432

Rupture Disk, Extruder Burst Plug, Hex Head, 6" Length Below Hex, 7,500 psi at 600 Degree F, 1/2"-20 UNF 2A Mounting Threads.
Catalog Page 105

Item# 143707

Extruder Screen, Circular, Stainless Steel, 2-1/2" x 20 Mesh.
Catalog Page 107

Item# 140396

Rupture Disk, Extruder Burst Plug, Slotted Head, 1.82" Length, 7,500 psi at 600 Degree F, 1/2"-20 UNF 2A Mounting Threads.
Catalog Page 104

Item# 100875

Flash Trimmer, 1/2" Cutting Hole Each End.
Catalog Page 316

Item# 130593

Gate Cutter, 6", Economy Series, Econ6 Model Flat Back Blade, Slim Profile, Coil Spring, PVC Handles.
Catalog Page 280

Item# 130594

Gate Cutter, 7", Economy Series, Econ7 Model Flat Back Blade, Slim Profile, Coil Spring, PVC Handles.
Catalog Page 283

Item# 101068

Glove, Safety, Heavy Duty Womens, Cotton Blend, Package of One Dozen Pair
Catalog Page 446

Item# 101100

Glove, Safety, Heavy Duty Men's, Cotton Blend, Package of One Dozen Pairs.
Catalog Page 446

Item# 110671

Glove, Safety, Hot Mill Machine Knit 400 Degree with Nitrile "N" Pattern, One Pair.
Catalog Page 447

Item# 133753

Temperature Control Module, S20-D3C, Mechanical Input, Microprocessor-Based, 240 Volt, 15 Amp, 50/60Hz Either Fahrenheit or Celsius, Uses J & K Type Thermocouples, Amp Readout, Set Soft Start Duration.
Catalog Page 245
Instruction Manual

Item# 134620

Heater Band, 1-1/2" Inside Diameter x 1-1/2" Wide, Mica, 240 Volt, 300 Watt, Hot Sleeve, 12" Leads, Strap Lock-Up.
Catalog Page 162

Item# 134603

Heater Band, 1" Inside Diameter x 1" Wide, Mica, 240 Volt, 125 Watt, Hot Sleeve, 12" Leads, Strap Lock-Up.
Catalog Page 161

Item# 101446

Nozzle Tip, GP, 1-1/2" OAL, 7/8"-14, 1/2" Rear Opening, 1/2" Radius, 3/16" Orifice.
Catalog Page 490

Item# 101440

Nozzle Tip, GP, 1-1/2" OAL, 7/8"-14 Thread, 1/2" Rear Opening, 1/2" Radius, 1/8" Orifice.
Catalog Page 490

Item# 101479

Nozzle Tip, Nylon, 1-1/2" OAL, 7/8"-14, 1/2" Rear Opening, 1/2" Radius, 1/8" Orifice.
Catalog Page 491

Item# 135383

** This item has been discontinued and is no longer available. Replaced by P/N 175701 - Please contact IMS for details. ** Drawer Magnet 6" x 6" with Undrilled Blank Steel Flanges, Includes Slide Gate, Rare Earth Magnet, 6" x 6" Stainless Steel Housing with 6-1/4" x 6-1/4" Steel Flange Top Hole 4-1/4", Bottom Hole 2-7/8".
Catalog Page 721

Item# 134349

** This item has been discontinued and is no longer available. Replaced by P/N 175701 - Please contact IMS for details. ** Drawer Magnet 4" x 4" with Undrilled Blank Steel Flanges, Includes Slide Gate, Rare Earth Magnet, 4" x 4" Stainless Steel Housing with 4-1/4" x 4-1/4" Top Steel Flange and 4" x 4" Bottom Steel Flange, Top Hole 2", Bottom Hole 2".
Catalog Page 721

Item# 143609

Hopper Magnet, Heavy Duty 6" Round, 304 14 ga Stainless Steel with Ceramic Inserts, 1" OD Magnets, 7/8" Spacing Between 60 Degree Diverter HD Model.
Catalog Page 719

Item# 122649

Portable Resin Bin, Heavy Duty, 158lb / 4.5 cu ft Capacity, Ideal for Storage and Transfer of Material. Includes Translucent HDPE Bin with Lid, Powder Coated Welded Steel Framework, (4) Locking/Swivel Casters, Stainless Steel Slide Gate, and Vacuum Tube Port with Protective Cap.
Catalog Page 620

Item# 122650

Portable Resin Bin, Heavy Duty, 368lb / 10.5 cu ft Capacity, Ideal for Storage and Transfer of Material. Includes Translucent HDPE Bin with Lid, Powder Coated Welded Steel Framework, (4) Locking/Swivel Casters, Stainless Steel Slide Gate, and Vacuum Tube Port with Protective Cap.
Catalog Page 620

Item# 106009

Loader Hose, 1-1/2" ID, Smooth Cover, Clear Wall, White Helix Reinforced PVC and Seamless Smooth Bore.
Catalog Page 411

Item# 101087

Brass Brush, Small Toothbrush Style, 3/8" Wide x 7-7/8" Length, 1/2" Trim (Bristle) Length.
Catalog Page 84

Item# 123300

Copper Gauze, 5" Wide x 100 ft Roll, Reversible: Medium Outside Surface, Coarse Inside Surface, 0.003" x 0.015" Ribbon, Includes Pin to Hold Roll Together.
Catalog Page 591
SDS English

Item# 101020

Brass Rod, Straight with Point, 3/8" Diameter, 13-3/4" Long.
Catalog Page 91

Item# 103831

Mold Clamp Adjustment Bolt MAXX, 3/4"-10 Thread 2-1/4" OAL and 1-3/4" Thread Length.
Catalog Page 40

Item# 103880

Mold Clamp Washer MAXX, 1/2" Thick, 1-1/2" OD, 13/16" ID, Black Oxide
Catalog Page 56

Item# 103904

Mold Clamp Washer MAXX, 1/4" Thick, 1-1/4" OD, 21/32" ID, Black Oxide Finish
Catalog Page 56

Item# 105412

Plug, Water, 300 Series, 3/8" Passage, 1/4" NPT Male, Brass, 352.
Catalog Page 376

Item# 105519

Plug, Water, 300 Series, 3/8" Passage, 3/8" NPT Male, Brass, 353.
Catalog Page 376

Item# 105406

Water Coupler Replacement Seal for 300 Series (3/8" Passage) Quick Disconnect Couplers/Fittings. Material: Silicone, Temp Range: -90 to 400 F
Catalog Page 382

Item# 143446

Thinswitch for Mold Return Verification with Wire Clips, Screws and Allen Wrench for Adjustment. SMARTFLOW T-222
Catalog Page 74

Item# 144416

Versaswitch Limit Switch by SMARTFLOW, Core Location Switch to Prevent Damage and Accidents. SMARTFLOW V-222
Catalog Page 73

Item# 143448

Thinswitch, High Temp for Mold Return Verification with Wire Clips, Screws and Allen Wrench for Adjustment. SMARTFLOW HT-291
Catalog Page 74